Following approval by ISAF. The following rule change has now been approved. This is to make it easier for builders to join the hull and deck mouldings together.
The following amendments to the Class Rules have been approved by the Class Rules Sub-Committee to be effective 30 May 2012.
Rule 20.3.1 Amendment as follows: "The outer edges of these shall not project more than 38mm nor less than 6mm from the outside of the hull when measured at 90° to the face of the topsides. The gunwale rubbers shall extend the full length of the gunwales but may be rounded off at the extreme ends. The depth of the gunwale rubbers at the face of the topsides shall not exceed 30mm nor be less than 10mm 15mm
